TECHNICAL INFORMATION OF THE LASER MACHINES:
We are using top-modern 3D laser ablation machines that are specialy designed for precison machining. The lasers are 15w Nd:YVO4, diode pumped- and 100w Nd:YAG lamp pumped lasersources. A small spot size combined with stable pulsed lasers makes it possible to produce very accurate parts with a good surface finish. Even vertical walls are possible to produce by cutting the walls with an angled beam through the multi-axis technology.
The machines are equipped with high dynamic 3-axis galvanometer scanners and 3-axis XYZ traversing tables which means that totally 6-axis are available.
The programming and control of the machines are totally computer driven.
Automatical depth monitoring during the entire machining process assures a reliable and accurate machining result.
The positioning of the workpiece zeropoint in XY- is taken very precise with a CCD video microscopic camera.
| Machine type: | Lasertec 40S |
Deckel Maho DML40SI |
|---|---|---|
| Year: | 2006 | 2003 |
| Laser source: | 15W Nd:YV04, diode pumped | 100W Nd:YAG, lamp pumped |
| Wave length: | 1064Nm | 1064Nm |
| Laser spot diameter: | 0,04mm | 0,04mm or 0,1mm |
| Scanner type: | 3 axis with Z-shifter | 3 axis with Z-shifter |
| Laser working area: | 65mm x 65mm | 65mm x 65mm |
| Traversing paths of working table in XY: | 400mm x 300mm | 400mm x 300mm |
| Traversing paths of focusing axis in Z: | 500mm | 500mm |
| Automatical re-positioning for larger parts: | yes | yes |
| C- axis: | no | no |
| Minimum wall angle: | 0 degrees | 0 degrees |
| Zero point positioning in XY: | CCD videomicroscopic camera | CCD videomicroscopic camera |
| Automatical monitoring of machining depth: | yes | yes |
| Maximum table load: | 50kg | 50kg |
